The peristaltic pump consists of three parts: actuators, pump heads and hoses. The main competitive advantages of peristaltic pumps are that the fluid is isolated in the pump tube, the pump tube can be quickly replaced, the fluid can be reversed, it can run dry, and the maintenance cost is low.

Peristaltic pump driver with high precision maintenance-free motor, a new graphical display interface, settings, more convenient operation. Menu driven interface, programming and operation commands are available in a variety of languages. Remote control can be realized through the female connector on the drive. Programmable calibration ensures accuracy of distribution - the driver can store a set of calibration data for each size of the pump tube.

The peristaltic pump driver can select the driving motor according to the required control type. Most pump manufacturers consider the interchangeability between pump heads and actuators to a certain extent. This is particularly important in peristaltic pump testing and the initial stages of various studies.

1. fixed speed driver

It represents the simplest way of fluid delivery. The pump system can always maintain a constant operating speed throughout the operation. Sometimes the flow rate can be changed by replacing the size of the pump tube.

2. variable speed driver

Peristaltic pump in some special needs a larger flow regulation range of applications, may consider the choice of variable speed drive. Pumping the right flow at the right time requires some skill. Variable speed peristaltic pump drivers are generally capable of continuously variable speed between the lowest and maximum speeds. Motor speed, deceleration ratio and percentage speed adjustment are the three key factors to be considered when choosing peristaltic pump driver. The reverse characteristic of the peristaltic pump driver helps to clean the suction line before replacing the pump pipe.